Devices

Devices are created automatically when data comes from dataloggers. Settings of all devices can be made here.

Note: Device settings should be made when the station is defined.

Devices Types;

• Inventors
• Sensors
• Meter
• Stringbox

Select Datalogger

Here, a datalogger in the station can be selected and devices connected to it can be observed.

b) Sort Devices

Automatically sorts all devices by name.

By clicking the three dots at the level of the device names, devices can be edited, their history can be observed, merged with any device or deleted.

Edit

The name of the device and the substation it is connected to can be changed.

Scale Factor Configuration

Here, the MPPT number and kWp value of the device can be changed.

Substations and scale values can be changed by selecting one or more devices without clicking the Edit button.

Attention: Scale factor shows the capacity of inverters and stringboxes entered. (KWp) Scale value configuration must be done correctly in order for your alarms to work properly and to display your data correctly.

Clear Scale Factor Configuration

Note: Configuration steps are valid only for inverter and stringbox devices.

Device History

When the device is merged with another device, it is listed here.

Merge

It can be merged with another device in the same datalogger or with a device in a different datalogger. The selected source device is merged with the target device and the source device is removed from the system. After the target device is selected, the data selection page appears on the screen. Data dates are listed on a daily basis from the oldest date from which the data is received from the devices to the current date. Select the device data you want to import for each date and click on the merge button.

Delete

Deletes the selected device. If the device is used in the term 'Device (#ID: .....) will be deleted together with all its data. Are you sure you want to delete it? ' gives warning. If the device id is used in one of your defined terms, you must first remove the device id from the term.